|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
05091 PSLC03 thru Only One Name Means ProT ek'TionTM PSLC24C LOW CAPACIT ANCE TVS ARRA Y APPLICA TIONS Ethernet - 10/100 Base T Cellular Phones Audio & Video Inputs FireWire, SCSI & USB Interfaces IEC COMPA TIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns 61000-4-5 (Surge): 12A, 8/20s - Level 1(Line-Gnd) & Level 2(Line-Line) FEA TURES 350 Watts Peak Pulse Power per Line (tp=8/20s) Unidirectional & Bidirectional Configurations Available in Multiple Voltage Types Ranging From 3V to 24V Protects One Line ESD Protection > 40 kilovolts Low Clamping Voltage LOW CAPACITANCE: 10pF MECHANICAL CHARACTERISTICS Molded JEDEC SOT-143 Package Weight 10 milligrams (Approximate) Flammability rating UL 94V-0 8mm Tape and Reel Per EIA Standard 481 Marking: Marking Code SOT-143 PIN CONFIGURA TIONS UNIDIRECTIONAL BIDIRECTIONAL 1 4 1 4 2 3 2 3 05091.R5 8/03 1 www.protekdevices.com PSLC03 thru PSLC24C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20s) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TJ TSTG VALUE 350 -55C to 150C -55C to 150C UNITS Watts C C ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER (See Notes 1-2) DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 5A VC VOLTS 9.0 9.0 11.0 11.0 16.6 16.6 24.0 24.0 30.0 30.0 N/A N/A MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE VWM VOLTS PSLC03 PSLC03C PSLC05 PSLC05C PSLC08 PSLC08C PSLC12 PSLC12C PSLC15 PSLC15C PSLC24 PSLC24C 3U 3B 5U 5B 8U 8B 12U 12B 15U 15B 24U 24B 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 24.0 24.0 @ 1mA V(BR) VOLTS 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.6 16.6 26.7 26.7 @8/20s VC @ IPP 19.0V @ 20.0A 19.0V @ 20.0A 18.3V @ 17.0A 18.3V @ 17.0A 18.5V @ 17.0A 18.5V @ 17.0A 28.6V @ 11.0A 28.6V @ 11.0A 31.8V @ 10.0A 31.8V @ 10.0A 56.0V @ 6.0A 56.0V @ 6.0A @VWM ID A 125 125 20 20 10 10 1 1 1 1 1 1 0V @ 1 MHz C pF 10 10 10 10 10 10 10 10 10 10 10 10 Note 1: Part numbers with an additional "C" suffix are bidirectional devices, i.e., PSLC05C. Note 2: Unidirectional Only: Positive potential is applied from pin 2 to 1 or pin 3 to 4. 10,000 PPP - Peak Pulse Power - Watts FIGURE 1 PEAK PULSE POWER VS PULSE TIME IPP - Peak Pulse Current - % of IPP 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8s td = 20s 1,000 350W 8/20s Waveform e-t 100 td = t I /2 PP 10 0.1 1 10 100 td - Pulse Duration - s 1,000 10,000 0 5 10 15 t - Time - s 20 25 30 05091.R5 8/03 2 www.protekdevices.com PSLC03 thru PSLC24C GRAPHS FIGURE 3 POWER DERATING CURVE 40 Peak Pulse Power 8/20s 5 Volts per Division 100 80 % Of Rated Power FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PSLC03 30 60 20 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - C 150 10 0 ESD Test Pulse: 5 kilovolt, 1/30ns (waveform) FIGURE 5 INSERTION LOSS - PSLC05 FIGURE 6 RETURN LOSS - PSLC05 20 db 10 db per Division 10 db per Division 20 db Ref 0 db Ref 0 db -20 db -20 db -50 db 100 MHz per Division -50 db 100 MHz per Division 05091.R5 8/03 3 www.protekdevices.com PSLC03 thru PSLC24C APPLICA TION NOTE The PSLC Series are TVS arrays designed to protect I/O or data lines from the damaging effects of ESD and EFT. This product series provides both unidirectional and bidirectional protection, with a surge capability of 350 Watts PPP per line for an 8/20s waveform and ESD protection > 40kV. UNIDIRECTIONAL COMMON-MODE CONFIGURATION (Figure 1) The two PSLC Series devices provide protection in a common-mode configuration as depicted in Figure 1. Circuit connectivity is as follows: TVS Device 1: Line 1(D+) is connected to Pins 2 & 3. TVS Device 2: Line 2(D-) is connected to Pins 2 & 3. Both TVS Devices: Pins 1 & 4 connected to ground. Figure 1 - Unidirectional Configuration (Two TVS Devices) Common-Mode USB Protection ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 1 4 1 4 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; GND SOLDER PAD 2 USB OUTPUT CONNECTOR 3 2 3 USB IC D+ D- BIDIRECTIONAL DIFFERENTIAL-MODE CONFIGURATION (Figure 2) The PSLCXXC Series provides protection in a differential-mode configuration as depicted in Figure 2. Circuit connectivity is as follows: Line 1(RX) is connected to Pins 1 & 4. Line 2(TX) is connected to Pins 2 & 3. Figure 2 - Bidirectional Configuration Differential-Mode Ethernet Protection ETHERNET TRANSCEIVER CIRCUIT BOARD LAYOUT RECOMMENDATIONS Circuit board layout is critical for Electromagnetic Compatibility (EMC) protection. The following guidelines are recommended: The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. The path length between the TVS device and the protected line should be minimized. All conductive loops including power and ground loops should be minimized. The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. RX R 1 4 RJ-45 R 2 TX 3 05091.R5 8/03 4 www.protekdevices.com PSLC03 thru PSLC24C PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-143 A G L B S J PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 2.80 1.20 0.84 0.39 0.79 1.78 0.013 0.08 0.46 0.445 0.72 2.11 3.04 1.39 1.14 0.50 0.93 2.03 0.10 0.15 0.60 0.60 0.83 2.48 INCHES MIN MAX 0.110 0.047 0.033 0.015 0.031 0.070 0.0005 0.003 0.018 0.0175 0.028 0.083 0.0120 0.055 0.045 0.020 0.037 0.080 0.004 0.006 0.024 0.024 0.033 0.098 K F D H C R A B C D F G H J K L R S NOTES MOUNTING PAD TYPICAL DIM Millimeters 1 2 3 4 5 6 7 8 9 10 11 2.85 2.00 1.80 1.90 1.05 2.75 1.20 0.80 0.85 0.85 0.85 Inches 0.112 0.079 0.071 0.075 0.041 0.108 0.047 0.031 0.033 0.033 0.033 2 10 4 5 11 6 1 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PSLC05-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., PSLC05-T13. 3 7 8 9 Outline & Dimensions: Rev 1 - 11/01, 06011 COPYRIGHT (c) ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05091.R5 8/03 5 www.protekdevices.com |
Price & Availability of PSLCXX |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |